Description
The Shure Microflex MX395B/O Low Profile Boundary microphone is an ideal table microphone when minimal presence is of high priority. It is perfect for boardrooms, meeting rooms, and other sites where aesthetics are important. This MX395 mic is only 1 in. (2.5 cm) in diameter, and extends just 2 cm above the mounting surface when installed, yet it delivers clear, high quality sound. Choose from a selection of colors and pickup patterns for customized table installations.
- Type: Condenser (electret bias)
- Frequency Response: 5017000 Hz
- Polar Pattern: Omnidirectional
- Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
- Output Configuration: Active balanced
- Sensitivity (at 1 kHz , open circuit voltage): 28 dBV/Pa (42 mV) 1 Pascal=94 dB SPL: Maximum Sound Pressure Level (1 kHz at 1% THD, 1 kOhms load): 114 dB
- Equivalent output Noise (A-weighted): 21 dB SPL
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 73 dB
- Dynamic Range (1 kOhms load at 1 kHz): 93 dB
- Common Mode Rejection (10 Hz100 kHz): 45 dB minimum
- Preamplifier output Clipping level (1% THD): 8 dBV (0.4 V)
- Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Weight Net: 0.30 lbs. (0.136 kg)
- Logic Connections: LED IN: Active low (1.0V), TTL compatible. Absolute maximum voltage:-0.7V to 50V.
- Environmental Conditions: Operating Temperature: -1857 C (0135 degrees F); Storage Temperature: -2974 degrees C (-20165 degrees F); Relative Humidity: 095%
- Power Requirements : 1152 Vdc phantom, 2.0 mA
Reviews
There are no reviews yet.